This Article will walk you through pairing your B-hyve Indoor Smart Watering Timer. This video shows how to pair a B-hyve indoor underground timer to the B-hyve WiFi app. Doing so will give you total control of your timer and unlock the many smart watering features, automatic rain delays and remote watering from anywhere in…Read More »
Tag Archives: Underground Timer
If your timer disconnects often, and you find yourself unplugging it to re-connect frequently, this is the article for you. There are a couple of steps you can take that may resolve the issue. First, please download and install the OrbitAssist application on your phone or tablet using the steps found here. Using the OrbitAssist application,…Read More »
Need to program your timer but you’re not sure where to start? We’d be happy to show you how to create programs. Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest…Read More »
Need to program your timer but you’re not sure where to start? Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest of your stations. For example; Your grass may need to…Read More »
A fault message appearing on your timer or phone typically means that your Timer is detecting a short in the wire connected to the PUMP terminal. We’d like you to remove the wire from the PUMP terminal on your Timer, and try running a station or program manually. If the fault message does not appear,…Read More »
A fault message appearing on your timer or phone means that your B-hyve device is detecting a short in one of the station wires or solenoid attached to the B-hyve device. Typically this will happen with older valves or if you have multiple valves attached to one terminal of the B-hyve device. Our devices only…Read More »
This article will walk you through pairing your B-hyve XR Indoor/Outdoor Smart Watering Timer. First, make sure your controller is in pairing mode (indicated by the pulsing Blue Center button, and the “Pairing” on the left display segment. If this is not showing, then try unplugging your controller for 30 seconds and then plugging it back…Read More »
The watering budget is used to increase or decrease the amount of time the program selected will water. Example: If you have a program set to run a zone for 10 minutes, then at 100% watering budget, the program will do just that. If you were to change the percentage to 50% then the program…Read More »
Our Underground timers have between two and four programs that can be set to run at different times. You can have all of them set to run at different times for different amounts of time. You cannot have more than one zone/station running at the same time. The system will prevent this from happening to…Read More »
If your zone/station does not stop watering when a program ends, then this article should help with that. If the same valve/zone is having the issue each time, try moving the wire to a different terminal and test to see if it continues Note: If the same zone has an issue on a different terminal, then…Read More »