When testing the voltage coming from your timer, if none of your stations are running then you will see that each of your stations is outputting 24 Volts. The timer does this constantly to check for faults. Once you tell a specific station to run, then only that station should be putting out between 24-30…Read More »
Tag Archives: Troubleshooting
Looking for more information on mist systems or to get one of your own? How does misting work? Fine droplets of mist are sent into the air which cools the surrounding air by as much as 20 degrees through evaporation, depending on how hot and humid it is. Where should I install a mist system?…Read More »
There are a few places in a mist system that must be secure and clean to run leak-free and efficient all season long. Leaking where the mist nozzle connects to the fitting: Take your nozzle off and examine the nozzle and o-ring. If you notice any damage and cracks it may be time to replace…Read More »
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to the most relevant article to help identify and solve the problem. If you are saying the following: “I can’t connect to Wi-Fi / Bluetooth” “I’ve changed my Internet provider / Router…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to help identify and solve the problem. If you are saying the following: “I can’t connect to my Hub” “My flood sensors have gone offline” “I’m having trouble pairing with the Hub”…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to the most relevant article to help identify and solve the problem. If you are saying the following: “I can’t connect to my Hub” “My flood sensors have gone offline” “I’m having…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help solve the problem. If you are saying the following: “Every time I leave the property my B-hyve device disconnects” “My B-hyve device keeps dropping the Wi-Fi connection” Good Questions to ask yourself: Does the…Read More »
How to reconnect the 1st-Gen Indoor/Outdoor Timer when changing routers: For iOS: 1. Put your timer into pairing mode by rotating the dial to off and pressing the reset button (located inside the swing panel) for 10-12 seconds. 2. Tap My B-hyve and then Devices. 3. Choose Indoor/Outdoor Timer. 4. You will need to…Read More »
The following troubleshooting steps are intended to help with common issues such as: WiFi & Bluetooth connectivity Battery Life not reporting correctly The date and time aren’t correct Device is non-responsive Rebooting the B-hyve Device Rebooting your device can help with connectivity issues, as well as any display issues. For underground timers: Unplug it from…Read More »