Below is a video that will guide you through testing the attached zones on your B-hyve sprinkler controller. Devices Covered: 57946, 57950, 04080, 04082, 57915, 57925, 04060, 57985, 57995, 21005, 21205, 04138, 24511, 24632, 24634 Back to Support pageTags: B-hyve, B-hyve App, Program, Sprinkler, Troubleshooting
Tag Archives: Troubleshooting
If you are looking for the model number on your Orbit device, then this article should help with finding that. Most of our products will have the model number located somewhere on the device, so be sure to check whatever product you have to see if the model is available. Another option for finding the…Read More »
In order to receive notifications, your B-have device must be connected to a WiFi connection. Notifications will not be sent while using Bluetooth only or without a working WiFi connection. If the timer is connected to the WiFi network, you can check the notification settings in the app. From the app’s home page, tap on…Read More »
If you are seeing issues with the water continuously flowing with a full flow from your valve, then follow these steps: First, confirm that the valve is installed in the right direction. The flow arrows on the valve should be pointing in direction of the water flow. If the Valve is installed correctly, make sure…Read More »
If you are looking at the B-hyve app and notice that you may not be seeing the entirety of the app page, or are missing any “Save” or “Next” buttons, then we recommend going into your phone settings and making sure that the text size is set to normal. Sometimes, having a larger text size…Read More »
Low battery on the B-hyve hose faucet timers, will result in your timer turning itself to OFF automatically, being unable to turn it back to AUTO, and not allowing it to go into pairing mode. If you notice that your hose timer is perhaps not running the schedule you scheduled it to run, then it…Read More »
If you are hearing a buzzing noise coming from the solenoid on your Orbit timer, then this is to be expected. Some solenoids can be louder than others, but the buzzing comes from the magnets inside the solenoid being electrically activated and vibrating. Should you notice the noise, then as long as your valve is…Read More »
Disconnect the wire from station 2 when 4 is running. If 4 stops, replace the timer, if not, it’s a crossed wire. Back to Support pageTags: Indoor, Indoor/Outdoor, Troubleshooting, Underground Timer, Valve, Wiring, zone
Updating Wi-Fi Settings Reconnecting your timer to your Wi-Fi network. If your timer has lost connection to your Wi-Fi network, or you’ve changed routers/internet providers, the timer will need to be reconnected to the router. Put your timer into “Pair Mode” by rotating the dial to “off” and pressing the reset button (located inside the swing…Read More »
If you have a B-hvye XD or the B-hyve hose faucet timer, and are unable to activate smart watering on your device, then this article is for you. The most likely reason that you are unable to turn on smart watering is that your timer is not connected to your home WiFi. In order for our B-hyve hose…Read More »